Your furnace is an integral part of your home. Without one, you wouldn’t be able to stay warm during the winter. Yet furnaces can have some issues that are more common than others.

Let’s go over these problems and discuss what they might cost to fix so you know before you contact an HVAC technician. Some of the most common furnace repair issues include:

  • Furnace won’t turn on
  • Furnace doesn’t stay lit
  • Furnace won’t blow hot air
  • Furnace won’t turn off

1. My Furnace Can’t Start

There are a few reasons why your furnace won’t turn on, so make sure to check all of them.

  • Is your thermostat set right? Make sure it’s on “heat,” “auto” and that your preferred temperature is higher than the room’s current temperature. If you use a programmable thermostat, make sure it has new batteries.
  • Is the circuit breaker tripped? Your furnace can’t run if it doesn’t have power. Reset the switch if it’s facing the outside of the electrical panel.
  • Is the furnace switch off? Your furnace has a power switch found on or close to it. Since this switch looks like a light switch, it’s easy to unintentionally turn it off. If it was off, it may take your furnace a few minutes to start.
  • Is the air filter clean? A dusty air filter can create a lot of problems for your furnace. Replace yours if you can’t see light through it.

Estimated Repair Cost

This issue can be complex, so the estimated cost to repair it depends on what’s wrong.

2. The Furnace Ignition System Isn’t Working

Your furnace uses a certain sequence when it starts heating your home.

  1. Your thermostat detects the temperature has fallen and tells your furnace to turn on.
  2. The draft inducer fan turns on to bring in fresh air for combustion.
  3. The gas valve unlocks for the burners, which are lit electronically.
  4. The flame sensor tells your furnace the burners have been ignited.

If something is wrong during the sequence, your furnace will shut off as a preventive measure.

A couple of potential causes for this problem include:

  • Dirty or malfunctioning flame sensor. If the sensor doesn’t detect a flame, it will turn off your furnace to prevent natural gas from spilling into your home. The ignition process corrodes flame sensors as time passes. While cleaning during annual furnace maintenance can help, yours may eventually need to be taken out and changed.
  • Bad limit switch. This safety feature will shut off your furnace if it senses backdrafting. Backdrafting is dangerous, since carbon monoxide and natural gas can leak into your home. These switches can fail due to age, damage or dust buildup.
  • Old thermostat. If your thermostat isn’t working properly, your furnace won’t be able to run.
  • Dirty air filter. A dirty air filter can reduce airflow and force your furnace to shut off to avoid overheating. Make sure to replace yours every 30 to 90 days, or anytime you can’t see light through it.

Estimated Repair Cost

These costs are estimates, so it’s important to note yours may vary based on your furnace’s brand and model.

  • Flame sensor: $350–$500
  • Limit switch: $150–$300
  • Thermostat: $150–$350
  • Furnace filter: $10-$30

3. My Furnace Won’t Blow Hot Air

In many cases, this problem is linked to a wrong thermostat setting or a dusty air filter that’s limiting airflow. Use the steps above to resolve the issue.

4. The Furnace Can’t Shut Down

If it’s very cold outside or you like your home to be warm, your furnace may be working for a long time.

If this isn’t what’s happening, make sure your thermostat is set correctly and working properly. If your fan setting is at “on,” the blower motor will be running even when the furnace isn’t, so it’ll seem like your furnace is running all the time.

Alternatively, there might be a problem with the blower motor or your ductwork may be leaking air, forcing your furnace to run constantly to make up for the lost air.

Estimated Repair Cost

These costs are approximations, so it’s important to note yours may vary based on your furnace’s brand and model.

  • New blower motor: $250–$800
  • Seal ductwork: varies based on square footage

Everest Heating & Cooling Can Resolve Your Furnace Issues Quickly and Affordably

Furnace issues can be a costly headache, but not when you work with Everest Heating & Cooling. We’ve been providing the quality, affordable furnace repair Lansing homeowners have trusted since year. Contact us at 913-845-9463 to receive your free estimate today.